Defined in File Ifc4x3_rc1.h
IfcMechanicalFastenerType: public Ifc4x3_rc1::IfcElementComponentType¶
Definition from IAI: The element type (IfcMechanicalFastenerType) defines a list of commonly shared property set definitions of a fastener and an optional set of product representations. It is used to define mechanical fasteners mainly within structural and building services domains (i.e. the specific type information common to all occurrences of that type).
HISTORY New entity in IFC Release 2x2
Mechanical fasteners, especially bolts, are often standardized. To refer to a formal fastener designation according to a standard (a product norm), IfcRelAssociatesClassification together with IfcClassificationReference should be used.
IfcClassificationReference.ItemReference contains a machine-readable form of the formal fastener designation from the norm. Example: ‘M16X80-10.9-HV’ for a high-strength structural bolting assembly for preloading with hexagon bolt and nut. (On the other hand, IfcMechanicalFastenerType.Name contains a displayable name which may not necessarily be the same as the formal designation.) IfcClassificationReference.Name carries the short name of the fastener norm. Example: ‘EN 14399-4’ as the respective European standard for high-strength hexagon bolts. Optionally, the norm can be further described by IfcClassificationReference.ReferencedSource, including information like publisher and date of issue of the norm.
Property Set Use Definition
The property sets relating to this entity are defined by IfcPropertySet and attached by the HasPropertySets attribute.
The following property set definitions are applicable to this entity according to the PredefinedType attribute:
Subtype of mechanical fastener.
Whether the optional attribute NominalDiameter is defined for this IfcMechanicalFastenerType.
The nominal diameter describing the cross-section size of the fastener type.
Whether the optional attribute NominalLength is defined for this IfcMechanicalFastenerType.
The nominal length describing the longitudinal dimensions of the fastener type.
IfcMechanicalFastenerType(std::string v1_GlobalId, ::Ifc4x3_rc1::IfcOwnerHistory *v2_OwnerHistory, boost::optional<std::string> v3_Name, boost::optional<std::string> v4_Description, boost::optional<std::string> v5_ApplicableOccurrence, boost::optional<IfcTemplatedEntityList<::Ifc4x3_rc1::IfcPropertySetDefinition>::ptr> v6_HasPropertySets, boost::optional<IfcTemplatedEntityList<::Ifc4x3_rc1::IfcRepresentationMap>::ptr> v7_RepresentationMaps, boost::optional<std::string> v8_Tag, boost::optional<std::string> v9_ElementType, ::Ifc4x3_rc1::IfcMechanicalFastenerTypeEnum::Value v10_PredefinedType, boost::optional<double> v11_NominalDiameter, boost::optional<double> v12_NominalLength)¶