Class Ifc2x3::IfcTrapeziumProfileDef¶
Defined in File Ifc2x3.h
Nested Relationships¶
This class is a nested type of Struct Ifc2x3.
Inheritance Relationships¶
Base Type¶
public Ifc2x3::IfcParameterizedProfileDef
(Class Ifc2x3::IfcParameterizedProfileDef)
Class Documentation¶
-
class
Ifc2x3
::
IfcTrapeziumProfileDef
: public Ifc2x3::IfcParameterizedProfileDef¶ IfcTrapeziumProfileDef defines a trapezium as the profile definition used by the swept surface geometry or the swept area solid. It is given by its Top X and Bottom X extent and its Y extent as well as by the offset of the Top X extend, and placed within the 2D position coordinate system, established by the Position attribute. It is placed centric within the position coordinate system, that is, in the center of the bounding box.
HISTORY New class in IFC 1.5. The use definition has changed in IFC2x.
Figure 325 illustrates parameters of the trapezium profile definition.
Position
The parameterized profile defines its own position coordinate system. The underlying coordinate system is defined by the swept surface or swept area solid that uses the profile definition. It is the xy plane of either:
IfcSweptSurface.Position IfcSweptAreaSolid.Position
or in case of sectioned spines the xy plane of each list member of IfcSectionedSpine.CrossSectionPositions.
By using offsets of the position location, the parameterized profile can be positioned centric (using x,y offsets = 0.), or at any position relative to the profile. Explicit coordinate offsets are used to define cardinal points (e.g. upper-left bound). Parameter
The IfcTrapeziumProfileDef is defined within the position coordinate system, where the BottomDim defines the length measure for the bottom line (half along the positive x-axis) and the YDim defines the length measure for the parallel distance of bottom and top line (half along the positive y-axis). The top line starts with a distance of TopXOffset from [-BottomLine/2,YDim] (which can be negative, zero, or positive) and has a length of TopXDim along the positive x-axis.
Figure 325 — Trapezium profile
Public Types
-
typedef IfcTemplatedEntityList<IfcTrapeziumProfileDef>
list
¶
Public Functions
-
double
BottomXDim
() const¶ The extent of the bottom line measured along the implicit x-axis.
-
void
setBottomXDim
(double v)¶
-
double
TopXDim
() const¶ The extent of the top line measured along the implicit x-axis.
-
void
setTopXDim
(double v)¶
-
double
YDim
() const¶ The extent of the distance between the parallel bottom and top lines measured along the implicit y-axis.
-
void
setYDim
(double v)¶
-
double
TopXOffset
() const¶ Offset from the beginning of the top line to the bottom line, measured along the implicit x-axis.
-
void
setTopXOffset
(double v)¶
-
IfcTrapeziumProfileDef
(IfcEntityInstanceData *e)¶
-
IfcTrapeziumProfileDef
(::Ifc2x3::IfcProfileTypeEnum::Value v1_ProfileType, boost::optional<std::string> v2_ProfileName, ::Ifc2x3::IfcAxis2Placement2D *v3_Position, double v4_BottomXDim, double v5_TopXDim, double v6_YDim, double v7_TopXOffset)¶
-
typedef IfcTemplatedEntityList<IfcTrapeziumProfileDef>